This article explains how to configure email forwarding for a domain inside Peeker. Forwarding allows emails received by your inboxes to be redirected to another domain or destination you control.
Steps to Configure Forwarding
Step 1
Log into your Peeker account.
Step 2
Navigate to the Inboxes tab in the main dashboard.
Step 3
Select the domain you want to update forwarding for.
Step 4
Click the Change Forwarding button.
Step 5
Enter your desired forwarding URL using the following format:
https://your-domain-goes-here.com
Make sure the URL includes https:// and is spelled correctly.
Step 6
Click Configure Forwarding to save your changes.
Propagation Time
After configuring forwarding, allow up to 12 hours for the changes to propagate through DNS and internal systems.
During this time:
Forwarding may not activate immediately
Some emails may continue to route to the previous destination
No additional action is required
After Configuration
Once propagation is complete:
New incoming emails will be forwarded to the specified destination
Existing inbox setup and sending behavior are not affected
Common Mistakes to Avoid
Do not omit https from the forwarding URL.
Do not use invalid or inactive domains.
Do not enter email addresses instead of a forwarding URL.
Incorrect entries may cause forwarding to fail.
When to Contact Support
Contact support if:
More than 12 hours have passed and forwarding is still not active
Emails are not arriving at the destination domain
You entered the correct URL but forwarding appears inactive

